1)C. H. Liu, X. L. Li, S. H. Wang,J. H. Chen*, Q. Teng, J. Chen. A tuning nano-precipitation approach for achieving enhanced strength and good ductility in Al alloys.Materials and Design, 54(2014): 144-148.
2)X. B. Yang,J. H. Chen*,J. Z. Liu, F. Qin, J. Xie, C. L. Wu. A high-strength AlZnMg alloy hardened by the T-phase precipitates.Journal of Alloys and Compounds, 610(2014): 69-73.
3)Z. Gao, J.Z. Liu*,J.H. Chen*, S.Y. Duan, Z.R. Liu, W.Q. Ming, C.L. Wu. Formation mechanism of precipitate T1 in AlCuLi alloys.Journal of Alloys and Compounds, 624(2014): 22-26.
4)C. Li*, J. H. Chen, X. Wu, S. van der Zwaag. Effect of heat treatment on microstructure and properties with compression of metastable β-titanium alloy. Metal Science and Heat Treatment, 56(2014): 245-252.
5)J.Z. Liu*, S.S. Yang, S.B. Wang, J.H. Chen, C.L. Wu. The influence of Cu/Mg atomic ratios on precipitation scenarios and mechanical properties of Al-Cu-Mg alloys. Journal of Alloys and Compounds. 613(2014): 139-142.
6)L. Liu, J. H. Chen, S.B. Wang, C.H. Liu*, S.S. Yang, C.L. Wu. The effect of Si on precipitation in Al–Cu–Mg alloy with a high Cu/Mg ratio. Materials Science and Engineering: A, 606(2014): 187-195.
7)X.B. Yang, J.Z. Liu*, J.H. Chen, C.Y. Wan, L. Fang, P. Liu, C.L. Wu. Relationship between the strengthening effect and the morphology of precipitates in Al-7.4Zn-1.7Mg-2.0Cu (wt. %) alloy. Acta Metallurgica Sinica (English Letters), 27(2014): 1070-1077.
8)C. Li*, J.H. Chen, X. Wu, Zwaag van der S, A comparative study of the microstructure and mechanical properties of α+β titanium alloys, Metal Science and Heat Treatment, 56 (2014): 374-380.
9)李骏驰,陈江华,丁莹*,马春蕊,陈充林,方靖岳,张学骜. LaAlO3基体上CaBaCo2O5 +δ多晶薄膜的微观结构以及生长方式.功能材料, 17(2014): 17050-17053.
10)杨淑晟,刘吉梓,王双宝,夏申琳,刘路,陈江华.不同商用热处理工艺对Al-5.10Cu-0.65Mg (wt.%)合金性能影响及其强化机理的研究.中南大学学报, 2014, In press
11)朱东晖,陈江华,刘春辉*,黄昌军,王时豪,陈敬,顾媛. Al-Mg-Si与Al-Zn-Mg合金异质焊接接头力学性能和微观结构的关系.中国有色金属学报, 24(2014): 293-301.
12)刘路,陈江华,夏申琳,杨淑晟,王双宝*. V元素对2519铝合金组织与力学性能的影响.材料热处理学报, 35(2014): 78-83.
13)X.Z. Xiong, C.J. Tu*, D. Chen, J.Q. Zhang, J.H. Chen, Arc erosion wear characteristics and mechanisms of pure carbon strip against copper under arcing conditions, Tribology Letters, 53(2014): 293-301.
14)陈燕,伍翠兰*,谢盼,陈汪林,肖辉,陈江华.机械磨擦制备的Fe-20Mn-3Al-3Si钢表面相变强化层.金属学报, 50(2014): 423-430.