1)S.B. Wang,J.H. Chen*, M.J. Yin, Z.R. Liu, D.W. Yuan, J.Z. Liu, C.H. Liu, C.L. Wu. Double-atomic-wall-based dynamic precipitates of the early-stage S-phase in AlCuMg alloys. Acta Materialia, 60(2012): 6573-6580.

2)X.Q. Zhao, M.J. Shi,J.H. Chen*, S. B. Wang, C.H. Liu, C.L. Wu. A facile electron microscopy method for measuring precipitate volume fractions in AlCuMg alloys. Materials Characterization, 69(2012): 31-36.

3)C.Y. Cai,J.H. Chen*. An accurate multislice method for low-energy transmission electron microscopy. Micron, 43(2012):374-379

4)C. Li*, J.H. Chen, X. Wu, W. Wang, S. van der Zwaag. Tuning the stress induced martensitic formation in titanium alloys by alloy design. Journal of Materials Science, 47(2012): 4093-4100.

5)F.L. Jiang, H. Zhang, L.X. Li, J.H. Chen, The kinetics of dynamic and static softening during multistage hot deformation of 7150 aluminum alloy, Materials Science and Engineering A, 552(2012): 269-275.

6)方磊,赵新奇*,陈江华,刘吉梓,杨修波,刘萍,明文全,伍翠兰, Al-Zn-Mg基合金多级时效不同热处理阶段的析出行为研究.电子显微学报, 31(2012): 202−210.

7)高珍,陈江华*,刘吉梓,刘自然,伍翠兰, Al-Cu-Li合金中T1相的演变规律研究.电子显微学报, 31 (2012): 308-314.

8)桑益,陈江华*,刘春辉,王时豪,黄昌军. Mg/Si含量比值对Al-Mg-Si合金析出行为的影响.电子显微学报, 31 (2012): 384-390.

9)桂奇文,陈江华*,伍翠兰,王双宝, Al-Cu-Mg合金中T相的扫描透射电镜研究,电子显微学报, 31 (2012): 301-307.

10)冯佳妮,陈江华*,刘春辉,廖元飞,李祥亮.预时效对6016铝合金烤漆前后组织和性能的影响.电子显微学报, 31 (2012): 461-468.

11)廖元飞,陈江华*,刘春辉,李祥亮,冯佳妮. Al-Mg-Si-Cu合金中晶界和晶内析出相粗化规律的研究.电子显微学报, 31 (2012): 116−123.

12)王时豪,陈江华*,刘春辉,桑益,王漪雯,龙慧池,多级时效对Al-Mg-Si(Cu)合金力学性能和显微结构的影响.电子显微学报, 31 (2012): 420-426.